mb2m, mb4m & mb6m vishay general semiconductor document number: 88660 revision: 01-feb-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 miniature glass passivated single-phase bridge rectifiers features ? ul recognition, file number e54214 ? ideal for printed circuit boards ? applicable for automative insertion ? high surge current capability ? recommended for non-automotive applications ? solder dip 260 c, 40 s ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications general purpose use in ac-to-dc bridge full wave rectification for power supply, lighting ballaster, battery charger, home appliances, office equipment, and telecommunicatio n applications. mechanical data case: mbm epoxy meets ul 94v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 e3 suffix for consumer grade, meets jesd 201 class 1a whisker test polarity: as marked on body primary characteristics i f(av) 0.5 a v rrm 200 v, 400 v, 600 v i fsm 35 a i r 5 a v f 1.0 v t j max. 150 c case style mbm ~ ~ ~ ~ notes: (1) on glass epoxy p.c.b. mounted on 0.05 x 0.05" (1.3 x 1.3 mm) pads (2) on aluminum substrate p.c.b. with an area of 0.8" x 0.8" (20 x 20 mm) mounted on 0.05 x 0.05" (1.3 x 1.3 mm) solder pad maximum ratings (t a = 25 c unless otherwise noted) parameter symbol mb2m mb4m mb6m unit device marking code 2 4 6 maximum repetitive peak reverse voltage v rrm 200 400 600 v maximum rms voltage v rms 140 280 420 v maximum dc blocking voltage v dc 200 400 600 v maximum average forward output rectified current (fig. 1) on glass-epoxy p.c.b. on aluminum substrate i f(av) 0.5 (1) 0.8 (2) a peak forward surge current 8.3 ms single half sine-wave superimposed on rated load i fsm 35 a rating for fusing (t < 8.3 ms) i 2 t 5.0 a 2 s operating junction and storage temperature range t j , t stg - 55 to + 150 c
mb2m, mb4m & mb6m vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88660 revision: 01-feb-08 2 note: (1) measured at 1.0 mhz and applied reverse voltage of 4.0 v notes: (1) on glass epoxy p.c.b. mounted on 0.05 x 0.05" (1.3 x 1.3 mm) pads (2) on aluminum substrate p.c.b. with an area of 0.8" x 0.8" (20 x 20 mm) mounted on 0.05 x 0.05" (1.3 x 1.3 mm) solder pad ratings and characteristics curves (t a = 25 c unless otherwise noted) electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol mb2m mb4m mb6m unit maximum instantaneous forward voltage drop per diode 0.4 a v f 1.0 v maximum dc reverse current at rated dc blocking voltage per diode t a = 25 c t a = 125 c i r 5.0 100 a typical junction capac itance per diode (1) c j 13 pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol mb2m mb4m mb6m unit typical thermal resistance r ja r ja r jl 85 (1) 70 (2) 20 (1) c/w ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode mb2m-e3/45 0.22 45 100 tube figure 1. derating curve for output rectified current 0 20 40 60 8 0 100 120 140 160 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0. 8 al u min u m s ub strate glass epoxy p. c . b . resisti v e or ind u cti v e load a v erage for w ard re ctified c u rrent (a) am b ient temperat u re (c) figure 2. maximum non-repetitive peak forward surge current per diode 1 10 100 0 5 10 15 20 25 30 35 f = 60 hz f = 50 hz t a = 40 c single half sine- w a v e nu m b er of cycles peak for w ard s u rge c u rrent (a) 1.0 cycle
mb2m, mb4m & mb6m vishay general semiconductor document number: 88660 revision: 01-feb-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 package outline dimensions in inches (millimeters) figure 3. typical forward voltage characteristics per diode figure 4. typical reverse leak age characteristics per diode 0.01 0.1 1 10 t j = 150 c t j = 25 c instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) p u lse w idth = 300 s 1 % d u ty cycle 1.5 0.3 0.5 0.7 0.9 1.1 1.3 0 20 40 60 8 0 100 0.01 0.1 1 10 100 t j = 125 c t j = 25 c percent of rated peak re v erse v oltage (%) instantaneo u s re v erse leakage c u rrent ( a) figure 5. typical juncti on capacitance per diode 0.1 1 10 100 0 5 10 15 20 25 30 1000 re v erse v oltage ( v ) j u nction capacitance (pf) t j = 25 c f = 1.0 mhz v sig = 50 m v p-p 0.106 (2.70) 0.090 (2.30) 0.147 (3.73) 0.137 (3.4 8 ) 0.161 (4.10) 0.144 (3.65) 0.190 (4. 8 3) 0.179 (4.55) 0.029 (0.74) 0.017 (0.43) 0.105 (2.67) 0.095 (2.41) 0.205 (5.21) 0.195 (4.95) 10 to 15 0.02 8 (0.71) 0.020 (0.51) 0.016 (0.41) 0.006 (0.15) 0.14 8 (3.75) 0.132 (3.35) 0.049 (1.24) 0.039 (0.99) case style mbm
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
